TY  - CONF
TI  - Enabling Lean Design With Management of Model Maturity
AU  - Nøklebye, Andreas
AU  - Svalestuen, Fredrik
AU  - Fosse, Roar
AU  - Lædre, Ola
AD  - MSc, Student, Department of Civil and Environmental Engineering, NTNU – Norwegian University of Science and Technology, 7491 Trondheim, Norway, Mobile +4745236866, asnoklebye@gmail.com
AD  - PhD Candidate, NTNU/Veidekke, Trondheim, Norway, +4798673172, fredrik.svalestuen@ntnu.no
AD  - Regional Manager, Lean Construction, Skanska, Oslo, Norway, +4793444588, roar.fosse@skanksa.no
AD  - Associate Professor, dr.ing., NTNU, Trondheim, Norway, +4791189938, ola.laedre@ntnu.no
PY  - 2018
DA  - 2018/07/18
T2  - 26th Annual Conference of the International Group for Lean Construction
C3  - 26th Annual Conference of the International Group for Lean Construction
CY  - Chennai, India
SP  - 79
EP  - 89
DO  - 10.24928/2018/0404
SN  - 2309-0979 (ISSN)
AB  - Traditional construction management has struggled with an ad hoc approach to design, increasing the number of negative iterations and sacrificing potential value. Building Information Modelling (BIM) has been driving information management in design, but its use has yet to be described in a way which makes it compatible with planning tools such as Last Planner™. Level of Development (LOD) could allow for this by attributing maturity to the BIM-model, yet previous studies of LOD implementation have shown potential for improvement. This paper researches current approaches, experiences and requirements for using maturity-based management in design. A study of two large projects with maturity-based management using interviews and an analysis of measurements was conducted in addition to a literature scoping study. The paper formulates five aspects of BIM-based workflows which needs to be addressed in order to manage their development. In addition, the study reveals how use of maturity-based management can provide a foundation for managing BIM-based workflows according to lean principles. Finally, the paper concludes with practical recommendations for enabling lean design with management of model maturity, such as how to specify maturity levels or how to disaggregate the model into disciplinary sections.
KW  - Lean design
KW  - BIM
KW  - LOD
KW  - Set-Based Design (SBD)
KW  - Last Planner
L1  - https://www.iglc.net/papers/details/1604/pdf
UR  - https://www.iglc.net/papers/details/1604
DB  - IGLC.net
LA  - English
N1  - Export date: 04 October 2026
ER  -